Uus puiduhakkur Stiler RĘBAK TARCZOWY FD - TH 20KM, WOOD CHIPPER 20HP

The STILER FD - TH WOOD CHIPPER is reliable, very strong, equipped with rollers feeding the material on the disc.

The self-picking mechanism consists of two hydraulic shafts.

The machine is designed for grinding branches up to a diameter of 16 cm (up to 30 cm with roots)
Technical data:

    The size of the shredded material: 16 cm in diameter (maximum 30cm with roots)
    Drive system: direct drive, PTO shaft
    Engine power for max. Efficiency: 20-100 km
    Cover ejection: 10 x 25 cm
    The size of the cutting disc: 66cm
    Number of cutting knives: 2 + 1 counterblade
    Knife type: hardened tool steel
    Weight of the cutting disc: 98 kg
    Material feeding mechanism: 2 hydraulic feed rollers
    Roller supply: OWN HYDRAULIC PUMP
    Mounting system: three-point suspension system (tuz)
    Dimensions: 140cm x 120cm s x 182cm w
    Batch hopper: 50 x 50 cm
    Rotation range of the ejection tube: 360 °
    The height of the ejection tube: 182cm / option 240cm
    Rated PTO revolutions per minute: 540-720
    The chipper weight: 480 kg

Included:

    Chopper
    PTO power take off
    2 knives and double knife
    User manual
    CE certificate

Characteristic:

    Its design uses high quality knives that can be replaced on the side of the machine by one person in just 10 minutes thanks to easy access panels.
    The strength of our machines is demonstrated by the use of solidly made sheet steel.
    The chipper is equipped with a pull roller with teeth made of high carbon steel. The advantage of this type of shaft is that it aggressively grips each branch with a thickness of up to 16cm with or without leaves.
    The chipper has three MASSIVE bearings of high strength on which the main shaft is mounted and reinforced, wide, drive belts.
    Adjustable legs allow connecting the chipper to a larger range of tractors. This innovation makes it easier to achieve the recommended angle of the power take-off (less than 15 degrees) on larger tractors.
    The upper handle is used to lift the feed roller which makes it easier to pick up large diameters.
    Adjustable speed of the feed rollers. Reverse gear allows us to undo unwanted material.
    The red handle also serves as a safety switch. After pulling, the rollers stop feeding material
    The transparent vinyl partition protects the user from chip dispersion, allowing you to see what is happening in the tray.
    The ejection spout has an adjustable 360 ​​° rotation. Thanks to which we can direct the stream of chips to any direction.

The minimum tractor power required is 20 horsepower. The drive is transferred via the PTO power take-off shaft (included in the set).
Two hydraulically driven feed rollers make it easy for the machine to chop up branches. The machine draws the material itself on the disc itself. The chipper is equipped with its own pump.

The red lever serves to stop the hydraulic shafts in the event of a breakdown.

The versatile machine also adds adjustable feet thanks to which the machine fits almost all tractors available on the market.

The chipper has been equipped with a 3 point suspension system (TUZ). So the standard in all tractors available on the market.

The chips obtained have a dimension of 20 - 30 mm.

We add the power take-off shaft for GRATIS.

In the additional option we offer an extension of the hopper by 50 cm. MORE INFORMATION AVAILABLE UNDER THE PHONE NUMBER.