Uus puiduhakkur Stiler RĘBAK TARCZOWY CIĄGNIKOWY BX 42R, TRACTOR WOOD CHIPPER 10CM
Sokołów Podlaski
Kui olete otsustanud osta madala hinnaga tehnikat, veenduge, et suhtlete tegeliku müüjaga. Uurige välja võimalikult palju infot tehnika omaniku kohta. Üks petmisviisidest on esineda tegelikult olemasoleva ettevõtte nime all. Kahtluste tekkimise korral teatage sellest meile tagasisidevormi kaudu, et saaksime asja täiendavalt kontrollida.
Enne ostu sooritamist uurige hoolikalt erinevaid müügipakkumisi, et selgitada välja teie poolt valitud tehnika mudeli keskmine hind. Kui teie valitud müügipakkumise hind on oluliselt madalam sarnaste pakkumiste hindadest, olge ettevaatlik. Suur hinnaerinevus võib viidata varjatud defektidele või müüja petmiskatsele.
Ärge ostke kaupa, mille hind erineb tunduvalt analoogse tehnika keskmisest hinnast.
Ärge nõustuge kahtlaste tagatis- ja ettemaksudega. Kahtluste korral ärge kartke täpsustada üksikasju, küsige müüdava tehnika lisafotosid ja dokumente, kontrollige dokumentide ehtsust, esitage lisaküsimusi.
See on kõige levinum petmise viis. Ebaausad müüjad võivad küsida teatud ettemaksusummat, et „broneerida“ teile tehnika ostmise õigus. Sel moel võivad petised koguda suure rahasumma ja seejärel kaduda, nii et nendega pole enam võimalik ühendust võtta.
- Ettemaksu kandmine kaardile
- Ärge makske ettemaksu, vormistamata dokumente, mis tõendavad raha üleandmise akti, kui teil tekib müüjaga suhtlemisel kahtlusi.
- Raha kandmine „vahendaja“ kontole
- Selline palve peab tegema ettevaatlikuks; tõenäoliselt suhtlete kelmiga.
- Raha kandmine sarnase nimega ettevõtte kontole
- Olge tähelepanelikud, kelmid võivad esineda tuntud ettevõtete nimel, tehes ettevõtte nimes väikeseid muudatusi. Ärge kandke raha üle, kui ettevõtte nimi tekitab kahtlusi.
- Oma pangarekvisiitide märkimine reaalse ettevõtte nimel esitatud arvele
- Enne ülekande tegemist kontrollige, kas arvele märgitud pangarekvisiidid on õiged ja kuuluvad vastavale ettevõttele.
Müüja kontaktid
+48 792 75...
Kuva
+48 792 750 200
Poola 
Poola, Sokołów Podlaski
Poola, Sokołów Podlaski
Poola, Sokołów Podlaski
Poola, Sokołów Podlaski
Poola, Sokołów Podlaski
Poola, Sokołów Podlaski
Poola, Opalenica
Poola, Opalenica
Poola, Sokołów Podlaski
Poola, Sokołów Podlaski
Poola, Sokołów Podlaski
Poola, Poznań
Poola, Solec-Zdrój
Poola, Poznań
Poola, Podegrodzie
Poola, Słupia
Poola, Słupia
Poola, Słupia
Poola, Słupia
Poola, Słupia
The machine is used for shredding branches, tree trunks up to 10 cm in diameter, with roots up to 25 cm.
A newer reinforced model.
BUILT-IN PUMP AND HYDRAULIC OIL TANK
EQUIPPED WITH A NEW GENERATION HYDRAULIC SYSTEM WITH RELIABLE DISTRIBUTORS !!!
Technical data:
Model: BX42R
The size of the shredded material: 10cm in diameter (maximum 25cm with roots)
Drive system: Drive from tractor engine transmitted by PTO
Minimum tractor power: 18 hp
Rotor size: 610 mm
Rotor thickness: 18 mm
Number of cutting knives: 4 + 1 counterblade
Knife type: Hardened tool steel CR12
Material feeding mechanism: Tractor hydraulic drive - 2 gears
Mounting system: Three-point suspension system (three-point linkage)
Dimensions (with folded hopper): 101cm D x 106cm S x 152cm W
Batch hopper: 50 x 50 cm
Rotation range of the ejection tube: 360 °
The height of the ejection tube: 152cm
Nominal revolutions per minute / Nominal revolutions: 540-1000
The chipper weight: 340 kg
Specification:
The material collecting system consists of two hydraulically driven cogged shafts.
The material retrieval mechanism has a 10-step speed controller and a material dispensing function
The chipper has a massive disc with a diameter of 610 mm and a thickness of 18 mm.
The blade has 4 blades cut on both sides sharpened with dimensions 210 mm x 60 mm.
In addition, the shield shield is secured against a knife.
The construction of the rotor allows for long-term work without loading the tractor.
All bearings protected against dust, stripping, etc. are lubricated by easily accessible calendars.
The disc also has breakers (shovels) shredding the resulting framework to a value of 20-50 mm.
The chipper with a three-point linkage (TUZ) is designed to work with a farm tractor with a minimum power of 18 km.
The drive from the tractor to the chipper is transferred by means of a transmission shaft equipped with a safety pin, which is cut in the event of too much load on the machine and disconnects the direct drive.
The chipper is additionally equipped with shield ventilation.
The set also includes PTO PTO shaft
The generated chips are thrown by a tube rotated by 360 ° in relation to the chipper's base.
The chips obtained have dimensions from 20mm to 60mm.
4 knives sharpened on both sides ensure very high productivity and longevity of the machine. The blades are made of hard tool steel. The machine has 1 counterblade.
The back of the shield has been equipped with breakers and shovels for more efficient ejection of chips from the machine
The machine has two hydraulic feeding rollers. They accelerate work and make it easier to feed branches to the target. In addition, the machine has 10 feed speeds and reverse gear for branch retraction.
The revolutions are transmitted through a power take-off shaft where we connect the machine directly to the tractor shaft. The minimum required rotational speed is 540 rpm.
The machine is equipped with a three-point linkage suspension system.
The 360 ° rotary blast allows you to direct the stream in any direction.