Uus kännufrees Stiler FREZARKA DO PNI 13,5KM SPALINOWA, STUMP GRINDER 13,5 HP 40CM

STILER gas trimmer powered by a 15 hp Briggs & Stratton engine.
The STILER milling machine is designed for milling and removing stumps of felled trees.
The milling disc is powered by a Briggs & Stratton engine with a capacity of 420 cm3 and 15 hp for adequate power and torque.
The grubber enables shredding the trunk to a depth of 400 mm!
A device with a width of only 85 cm, especially useful in hard-to-reach places. Replaceable teeth on the milling disc are covered with sintered carbide (vidia) ensuring high hardness of the blade.
The latest model of STILER 15 HP petrol stump milling machine

THE MILLING MACHINE HAS A BUILT-IN BATTERY, STARTING WITH A KEY
Technical data:

CE certified: YES
Engine: air-cooled, 4-stroke OHV, gasoline engine
Engine power: 15.0 HP
Capacity: 420cc
Starting: manual / key (built-in battery)
Fuel: Unleaded gasoline
Fuel tank capacity: 6.5 liters
Head drive: belt transmission
Brake: disc
Dial diameter: 35 cm
Number of cutting teeth: 8 replaceable teeth, made of widia
Milling depth: up to 400 mm
Milling width: 55 mm
Dimensions (L x W x H): 205 x 85 x 130 cm
Wheel:15"
Ball mount: 50mm
Weight: 135 kg

The new model is equipped with a stronger and more efficient blade with sintered carbides.

The round cutter is divided into 3 cutting edges, when one edge becomes dull, simply loosen the carbide and turn it 1/3 turn.

Thanks to this solution, we get 3 times longer work on one milling cutter.

A powerful 15 hp OHV 4-stroke engine with a capacity of 420 cm3 of the well-known and respected Briggs & Stratton brand allows us to mill even very hard stumps without any problems. The large reserve of power also translates into a longer service life of the machine.

The milling machine has a disc brake lever. It is used to block one wheel during milling. Thanks to this solution, the machine does not escape us during work and ensures even guidance along the trunk.

A separate mechanism that drives the blade is engaged by a second lever.

The adjustable handle allows milling up to 40 cm deep.

The milling machine is equipped with a handle with a 50 mm ball hitch.

The brake placed in one wheel makes the milling machine not move away during operation.

The control panel is equipped with speed regulation, an emergency switch and a limit switch that disconnects the ignition after releasing the handle.